400-888-7008 | 400-160-5678
Current location: News Center>Industrial News < Return to list

Laser has more advantages than plasma in sheet metal processing

Published:2020-11-11 Browse:7Editor in charge:DNE Laser (Member of Bystronic)

At present, many industries such as heavy industry are discussing and experimenting to replace plasma cutting machine with 10,000 watt laser cutting machine, which brings more efficiency, better effect and more benefits.



Smaller kerf, more saving plate


Because the laser beam is focused into a small spot, for the same size plate, the laser cutting kerf is smaller and the plasma cutting kerf is slightly larger. Compared with plasma cutting, laser cutting can save 6-9% of material.



Non-destructive processing, environmental protection


The laser processing is flexible, which can process any complex graphics, cut tubes and other profiled bar. In addition, laser cutting is a non-contact cutting to ensure that the workpiece is not scratched. The cutting edge is little affected by heat. There is basically no thermal deformation of the workpiece, and the production process is green and pollution-free.


Plasma cutting will cause large or small damage to the workpiece. If there were problem with the cutting nozzle of the plasma cutting machine during the cutting process, it will cause obvious defects to the plate, and the smoke and dust during the processing will pollute the environment.



Accelerated efficiency and doubled business


The development of new technologies must improve efficiency in order to create more value for users. On the premise of improving the processing quality, the processing efficiency of 10,000-watt fiber laser cutting has also been doubled, allowing end users to complete more business volume in the same time



Reduce costs and expenditures, increase benefits


If you wanted to improve corporate efficiency, you must not only increase channels and  revenue, but also know how to reduce costs and expenditure. The 10,000-watt fiber laser cutting can not only greatly improve the processing efficiency, but also greatly reduce the overall processing cost, allowing the terminal sheet metal processing users to reduce costs and generate income.


According to relevant statistics, the global plasma cutting machine market has about 1.5 million units. Such a huge market scale is worth replacing with 10,000-watt laser cutting machines, so as to optimize the world's sheet metal processing technology and promote the industry development to a higher quality direction!