400-888-7008
400-160-5678
◆ After the material is corrected, it is smooth and smooth without indentation and does not damage the surface of the material.
◆ Imported electronic parts are used, with long life and few failures.
◆ The roller is made of hollow bearing steel material, after intermediate frequency treatment (surface hardness to 60°), it is hard chromed and then finely ground, with high hardness, excellent wear resistance and extremely long life.
◆ It is suitable for feeding and correcting various metal materials with good effect.
Material width: | 1300/1600(customized) |
Material thickness: | 0.3-2.0mm |
Leveling flatness: | 1 square |
Leveling roll: | Upper 4 lower 5 (diameter 70mm) hard chrome plated on the surface |
Pinch roll: | 2 groups (upper diameter 90mm, lower diameter 122.7mm); hard chrome plating on the surface; The shaft head is lengthened and equipped with a one-inch sprocket for lap rolling net |
Feeding length: | 9999.99mm |
Feeding speed: | 30m/min |
Feeding accuracy: | 1M±0.50mm |